Interfaces up to cp65xx-0060, Ps/2 connections, Parallel interface – BECKHOFF CP65xx User Manual
Page 10: Serial interfaces, Vga connection, Usb interfaces, Network connection, Sound-on-board, Sound-on-board 8
Product Description
Interfaces up to CP65xx-0060
ATX motherboard
interfaces
PS/2 connections
PS/2
The upper PS/2 connector (1) allows a PS/2 mouse to be used, while a PC
keyboard can be connected to the lower PS/2 connector (2).
Parallel interface
Printer
LPT1
The parallel interface (3) corresponds to the Centronics standard, and is
addressed by the software as LPT1.
Serial interfaces
RS 232
COM1 - COM2
The basic version of the Industrial PC has two serial interfaces, COM1 (4)
and COM2, using the type RS 232, which are each brought to a 9 pin
SUB-D plug connector. The interface COM2 is located in the upper part of
the first slot right beside the ATX-slot.
VGA connection
VGA
A 15-pin SUB-D socket connector (5) allows a VGA monitor to be
connected.
USB interfaces
USB1 – USB4
The four USB interfaces (6 - 9) are used to connect peripheral devices with
USB connections.
Network connection
Network
The RJ-45 connector (10) allows the PC to be connected to a Local Area
Network (LAN).
Sound-On-Board
Sound
The Industrial PC has a on-board-interface with the following connectors:
Line In jack (11), Line Out jack (12) and Microphone jack (13).
3
10
11
1
12
4
5
6
8
2
13
7
9
8
CP65xx