Avionics Innovations AI-FPD-6 with Arm - Manual (Page 8)

Power
The A1-6 FPD accepts 28 VDC. The white wire is positive, and the white/blue wire is
negative/ground.
Video
The A1-6 FPD accepts a composite NTSC video signal.
Note: Do not split the video source to two or more inputs, as this may not provide a
quality video signal.
POST INSTALLATION CHECKOUT
1. Inspect monitor for any physical damage.
2. Check monitor for proper operation
Note: Panel will not power up until a video signal is applied
Revision NC 10/4/2002
Page 7
Avionics Innovations, Inc