Audioscan Axiom - Manual (Page 65)

Axiom ® User's Guide Version 1.8  May 2015
7. Click on [Calibrate] and follow the setup instructions.
8. Click on to generate the coupler response curve (green). When this curve is stable, click on
to save it.
9. Click on [Daily] or [Weekly] to toggle the measurement interval for the coupler response.
Measure RECD
Connect the RECD transducer to the RECD jack on the underside of the test chamber. Prepare the system for
on-ear tests. See Calibration of on-ear probe microphone.
65