April Music Stello DA100 - Manual (Page 7)

Set -Digital Out- mode as -PCM-
z From DVD Setup Menu, go to Audio Setup Æ Digital Out Æ
PCM.
z Many of DVD or universal players today support digital output
with ‘96kHz’.
Set output to ‘96kHz’ because DA100 accepts output up to
24 Bit / 96 kHz. Some CDs, DVDs, DADs outputs 96 kHz signal
and you will be stunned with the reproduced sound!
- USB : Any USB (Universal Serial Bus) output can be connected with this
port.
*Refer to 4.3 for the PC connection.
z DA100 does not support ASIO driver.
DA100 is designed for pure playback mode only.
ANALOG OUTPUT : Connect this output to your preamplifier or
integrated amplifier.
Make sure of the right connection for the correct channel
(LEFT & RIGHT).
7