5. functions description – Analog Way V-Scale C - VSL300 User Manual
Page 23
VSL range
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
PAGE 23
4-5. FUNCTIONS DESCRIPTION
1[INPUT] + ENTER.
1-1 [Input
type]
+
ENTER.
c Select an input with + ENTER.
d Select the video signal type with + ENTER between:
• [SDTV Composite]: Composite video signal (Input #2 of the VSL121, #4 of the VSL241 and VSL300).
• [SDTV S.VIDEO]: S.VIDEO signal (Input #2 of the VSL121 & #4 of the VSL241 and VSL300).
• [SDTV YUV]: Component signal (Input #3 of the VSL241 and VSL300).
• [SDTV RGBS TTL]: RGBS video signal with TTL sync (Input #3 of the VSL241 and VSL300).
• [SDTV RGB SOG]: RGB video signal with Sync On Green (Input #3 of the VSL241 and VSL300).
• [SDTV RGBS ana.]: RGB video signal with analog sync (Input #3 of the VSL241 and VSL300).
• [Return]: Allows to return to the previous menu without safeguarding.
e Then select the video standard (Inputs #1, 2 & 4) with + ENTER between:
• [NTSC / PAL / SECAM]: automatic NTSC, PAL and SECAM standard detection.
• [NTSC]: NTSC standard detection only.
• [PAL]: PAL standard detection only.
• [SECAM]: SECAM standard detection only.
• [B & W 50/60 Hz]: Black and White detection.
• [Return]: Allows to return to the previous menu without safeguarding.
1-2 [Used input] + ENTER.
Select an input and then select an item with + ENTER between:
• [used]: A signal is connected to the input.
• [unused]: No signal is connected to the input. The input is unused.
1-3 [VCR
mode]
+
ENTER.
This function allows improving the image contour of low quality VHS tapes. Select [on] with ENTER.
1-4 [Input
priority]
+ ENTER.
Select an item with + ENTER between:
• [none]: No
input
priority.
• [Computer]: Priority to the Computer input. The last selected video input is automatically displayed if no
signal is detected on the computer input.
• [Video]:
Priority to Video input. The computer input is automatically displayed if no signal is detected on
the selected video input.
• [Return]: Allows to return to the previous menu without safeguarding.
1-5 [Input status] + ENTER.
Indicates the status of the selected input.