Dish Network Solo 301 - Manual (Page 42)

Page 37
Using Timers
Page 37
4. Select the Create option to save the event timer.
5. The receiver displays a timer symbol in the Program Guide , and also
when you press the INFO button to get information about the program.
S ETTING U P A M ANUAL E VENT T IMER
1. Press the MENU button.
2. Select the Timers option.
3. Select the Create option. The receiver displays the Create a
Manual Event Timer menu.
4. Select a Timer Type option.
5. Select a Timer Frequency option.
6. Select a channel:
• Highlight a channel using the UP or DOWN
ARROW button. Then, press the SELECT button.
• Enter a channel number using the number buttons.
7. Select the Set Date/Time option. The receiver displays the Set Date/
Time for Manual Timer menu.
8. Use the NUMBER PAD buttons to enter the Start Time (this includes
selecting AM or PM ) and the End Time (this includes selecting AM or
PM ).
9. Use the NUMBER PAD buttons to enter the Date .
10. Select the Create Timer option.
Tip: You may start
any timer one
minute early. But if
you set back-to-
back event timers
and the second one
starts early, the first
one will end early.
An event timer
cannot start early
for a pay per view
program. If you try
to set a timer for
overlapping events,
you will get an error
message.
Tip: Use the
Program Guide or
your printed
television guide
to see when the
program(s) starts
and stops —
before you go to
the Set Date/TIme
for Manual Timer
menu.