Print report, Write data to unit – WaveWare comPPage DVIF-10 User Manual
Page 6
Alarm Interface Utility Software V3.1.3
Writing Data to Unit
NOTE: WHEN WRITING or READING FROM THE DVIF10 ALWAYS USE A NULL MODEM CABLE
1. After programming of all contacts select [SaveFile] and enter a name for the file.
2. Select [TransmitData]. During writing to the unit a progress bar will appear at the bottom
of the screen.(Sending Data to the Alarm Unit..).
3. The
Green
light will change to
Red
when transfer of data is complete and the
Green
program
LED on the DVIF10 unit will turn OFF.
Print Report
1. Select [Print Report].
2. Printer dialog box will appear. Select the printer.
3. Print Report.
4. Select [EXIT] to close Alarm Program.
6