Audio Solutions T2642-E - Manual (Page 7)

7
SteP 4
In the hardware bag provided, locate the 4 pan head bolts that fit the thread pattern for your television.
With the bracket centered on the back of the TV, gently thread the screws into the holes by hand. DO NOT
USE AN ELECTRIC OR BATTERY DRILL until you are certain you have the right size thread. DO NOT OVER
TIGHTEN the screws (Figure 4).
Figure 4 - Attach Bracket to tV
NOTE: Use the proper bolts and washers that correspond to the mounting holes on the back of the TV.
Take care to tighten by hand first or damage to the mounting holes can occur. Some TVs without a flat
back may require the use of a spacer when attaching the brackets.
INStAllAtION