Installation guide – ABtUS AV815 User Manual
Page 9
*Specifi cations are subject to changes without notice.
2.8
Use the Tress head screws provided in
the package to tighten the Extension
Brackets to the Projector.
2.7
Assemble the selected Extension
Bracket with the following items:
Bottom Spacer, Spacer (if needed) &
Square Nut.
2.9
Lift up the Projector to check the CG of
the assembled Projector and tighten all
the screws once confi rmed.
The assembly is then completed.
INSTALLATION GUIDE
See also other documents in the category ABtUS Accessories for video:
- AV890-1500 (2 pages)
- AV891WS-1500-V1 (8 pages)
- AV820 (2 pages)
- AV817 (8 pages)
- AV602-TC (2 pages)
- AV601-RW (2 pages)
- AV813 (12 pages)
- AV601-D (2 pages)
- AV601-RS (2 pages)
- AV565-WT (2 pages)
- AV545-W2 (2 pages)
- AV545-W (2 pages)
- AV565-WT2 (2 pages)
- AV541 (2 pages)
- AV511 (2 pages)
- AV540 (2 pages)
- AV509 (2 pages)
- AV508-WP5 (2 pages)
- AV508-S (2 pages)
- AV508-WP1 (2 pages)
- AV508-DV (8 pages)
- AV508-D (2 pages)
- AV502-S (2 pages)
- AV483-L360A (2 pages)
- AV480-WT (2 pages)
- AV480-W2T (2 pages)
- AV420W-V1 (2 pages)
- AV419 (2 pages)
- AV418 (8 pages)
- AV417-V1 (8 pages)
- AV415W-XL (2 pages)
- AV417 (2 pages)
- AV410-P (2 pages)
- AV410-L (2 pages)
- AV415-W (10 pages)
- AV382-V1 (2 pages)
- AV383W6 (12 pages)
- AB2123308 (8 pages)
- AB2123108 (4 pages)