Pilz PSSu K F FCU - Manual (Page 27)

Wiring
Operating Manual PSSu K F FCU
1002391-EN-04
27
Wiring
General wiring guidelines
Please note:
} Signal lines do not have to be shielded.
} The outputs do not need suppression for inductive loads.
} Use copper wiring.
Connectors' mechanical connection
Please note:
} The conductor cross section on the spring-loaded terminals without ferrules is 0,20 -
1,00 mm², 22 - 18 AWG.
} If you are using multi-core or fine-core cables we recommend ferrules in accordance
with DIN 46228/Part 1 or DIN 46228/Part 4, 0.2 ... 1 mm 2 . To crimp the ferrules we rec-
ommend crimping pliers (crimp form A) conforming to EN 60947-1, such as the PZ 6/5
from Weidmüller, for example.
} Terminal points per connection: 1
} Stripping length: 8 mm
6
6.1
6.2