Pontiac 2008 G6 - Manual (Page 143)

Setting Cruise Control
{ CAUTION:
If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.
The cruise control buttons
are located on the steering
wheel.
J
(On/Off): Press this button to turn the cruise
control system on and off.
RES+ (Resume): Press this button to resume a set
speed and to accelerate the speed.
SET
−
(Set): Press this button to set a speed and to
decrease the speed.
[
(Cancel): Press this button to cancel cruise control.
To set a speed do the following:
1. Press the on/off symbol to turn cruise control on.
The indicator light on the button comes on.
2. Get to the speed you want.
3. Press the SET
−
symbol and release it. The cruise
symbol displays in the instrument panel cluster to
show the system is engaged.
4. Take your foot off the accelerator pedal.
When the brakes are applied, the cruise control
shuts off.
If the vehicle is in cruise control and the Traction
Control System (TCS) or Enhanced Traction System
(ETS) begins to limit wheel spin, the cruise control
automatically disengages. See Traction Control System
(TCS) on page 4-5. When road conditions allow, the
cruise control can be used again.
3-11