Lock'er Down Model LD 2026X - Manual

Instructions for Model 2026X Console Safe
1. If you have a combination lock, it is easier to set the combination before in-
stalling the safe.
2. Open console and empty contents.
3. Place lid section in console. Fig 1
4. Hold lid section up against top of opening and add side pieces loosely using
supplied nuts. Fig 2
5. Add end pieces and loosely attach nuts. Fig 3 NOTE: The short 3” piece goes
in front, and can be attached to the console with double sided tape, but this is
not necessary.
6. Place X bracket in bottom of console lining up the four studs from side pieces.
Fig. 4
Fig 1
Fig 2
Fig 3 Fig 4