Lingenfelter L710050607 Lingenfelter Suburban & Yukon XL Fuel Pump 2007 v1.1 - Manual (Page 5)

12) Slide one of the Oetiker clamps over
one end of the supplied fuel hose.
Install the hose onto the fuel pump
outlet. Crimp the clamp into position
over the fuel pump outlet.
13) Slide the other Oetiker clamp over the other end of the fuel hose.
Install the supplied fuel filter adapter fitting into the end of the hose.
Crimp the clamp into position over the adapter fitting.
14) Plug the new fuel pump harness wires into the top of the fuel pump.
15) Slide the supplied foam fuel pump sleeve over the end of the pump.
Position the sleeve at the top of the pump.
16) Slide the supplied fuel pump adapter ring over the inlet of the pump,
cupped end first.
Page 4 of 6
17) Install the supplied fuel pump pre-
filter (filter sock) over onto the inlet of
the pump. Gently press the pump into
the filter sock against a clean work
bench until fully seated.