Hall Research USB-EDID-PRO User Manual
Model usb-edid-hd15 edid reader/writer, 0 introduction, 0 features
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S. 800-959-6439
FREE technical support, Call 714-641-6607 or fax 714-641-6698
Address: Hall Research, 1163 Warner Ave., Tustin, CA
92780
Web site: www.hallresearch.com E-mail: info@ hallresearch.com
Model USB-EDID-HD15
EDID READER/WRITER
1.0 Introduction
Thank you for purchasing the Hall Research
Model USB-EDID-HD15. This device is used
to save, read and write 128 or 256 byte
EDID’s.
The product consists of a cable with a USB
and HD15 (female) connectors.
There is a free GUI available on our website for download. The GUI only supports
reading and writing values, no modification is allowed.
NOTE
ALWAYS USE EXTREME CAUTION WHEN USING THIS DEVICE.
HALL RESEARCH IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO ANY
DEVICE FROM THE EDID INFORMATION BEING OVERWRITTEN.
2.0 Features
Plug and Play operation – No Drivers
to install.
Read and Write 128 or 256 Byte
EDIDs
No Power Supply Required – USB
Powered
Save and Reload EDID Binary Files
3.0 Installation
Install the GUI software onto any Windows™ Compatible PC
Run the software from the Start Menu:
Program Files -> Hall Research -> USB-EDID-HD15 Programmer
UMA1192 Rev C