Hall Research VS4-YCA - Manual (Page 6)

VS4-YCA User’s Manual
4
By pressing the number keys, "1", "2", "3", "4", the VS4-YCA will switch to that S-Video/Audio input.
This will also put the VS4-YCA into Normal Mode.
Pressing "s" will put the VS4-YCA into Scan Mode. Before the VS4-YCA enters Scan Mode, you
will be asked how many seconds between switching:
"Seconds between switching? (1-60)".
To this question, you must input a number between 1 and 60 then press enter. Any other input will
cause this question to be repeated.
Pressing "b" will blank the S-Video output and mute the line level Stereo Audio output from the
VS4-YCA until the un-blank command is received.
Pressing "u" will un-blank the S-Video output and un-mute the line level Stereo Audio output from
the VS4-YCA if it was previously blanked.
Pressing "f" will reset the VS4-YCA with the factory defaults. The factory defaults are Normal Mode,
and the time interval between scanning is 5 seconds
.
3.4 Non-Volatile Memory
The VS4-YCA saves the last channel selected and the Mode of operation (scan vs. normal) after
power off. Blanking mode is not remembered.
4. Troubleshooting
Contacting Hall Research and Shipping/Packaging
Contact HRT Support at 714-641-6607 or via email or web. Before you do, make a record of the
history of the problem. We will be able to provide more efficient and accurate assistance if you have
a complete description. If you need to ship your unit for repair, make sure to get a RMA number
first.