Ditch Witch JT2020 - Manual (Page 25)

Controls - 24
JT2020 Mach 1 Operator’s Manual
Set-Up Console
CMW
7. Frame tilt control
To raise front end of drill
frame, pull up.
To lower front end of drill
frame, push down.
8. Left stabilizer control
To raise, pull up.
To lower, push down.
IMPORTANT: Lower left and right
stabilizers to the ground to stabilize
unit and then adjust for side-to-side
stability. After unit is level, adjust for
entry angle.
NOTICE: Stand clear of stabilizer to
avoid crushing your foot.
Item Description Notes