DOD GS30 - Manual (Page 12)

SECTION TWO - About the GS30
Performance Mode
he Performance Mode of the GS30 enables you to use the numbered footswitches or Data Wheel to change from
ne Preset to another, the Bank Footswitches to change Banks and the Expression Pedal to vary the amount of the
ssigned Parameter. From the Performance mode you may also bypass the effects by pressing the currently
elected Footswitch, or access the built-in chromatic tuner by pressing and holding the currently selected
ootswitch.
Selecting a Preset
he GS30 has 30 Factory and 30 User Preset locations. The Presets in the GS30 are arranged in 10 Banks with 3
resets in each bank. The User Presets are indicated by a decimal point in the bottom right corner of the Display.
he Factory Presets do not have the decimal point. Accessing the Presets may be done by using the Data Wheel or
ootswitches.
Data Wheel
While in Performance mode, the Data Wheel is used to select Presets. Simply rotate the Data Wheel until the
esired preset number is shown in the Display. The Data Wheel will scroll through all of the Presets in the User
et, and then scroll through all of the Presets in the Factory set. If you continue to rotate the Data Wheel, the GS30
ill “wrap around” and access the User Presets again. In edit mode, rotating the Data Wheel will change the status
r value of the selected effect or parameter. In Tuner mode, rotating the Data Wheel will change the tuning
eferrence. In Learn-A-Lick mode, rotating the Data Wheel will change the playback speed of the recorded
material.