Clearing all the stored, Changing the picture resolution – 'da Products PENCAM VOICE User Manual
Page 18
SW1
SW1
Clearing all the stored
Press the mode switch until CL appears on the LCD. Press SW1 and after a
beep the LCD starts to flash . Press SW1 again within 5 seconds and all
and the picture counter are cleared.
the
camera memory
Changing the picture resolution
Picture resolution may only be changed when the camera memory is empty.
If there are any pictures stored in your camera, the memory must be cleared
first. To change resolution, press the mode switch until the resolution icon is
displayed. To select "Hr" or " Lr", press SW1. Then the LCD shows the
number of remaining pictures at the current setting.
Change mode to "CL"
"CL" is displayed
Press SW1 to select clear mode
LCD starts to flash
Press SW1 to clear the memory
Change mode to "Hr" or "Lr"
"Hr" or "Lr" is displayed
Press SW1 to change resolution