Directed Electronics VIPER 5701 - Manual (Page 54)

Remote Start
Press . Remote start LED blinks for 3 seconds and remote start
tone sounds.
Rear Defogger
Press four times, and then press (only after remote start is
ON.) Remote start LED turns ON, and you will hear 1 beep.
To disable the remote start system
Move the shutdown toggle switch to the OFF position.
Location of Shutdown Toggle Switch___________________
Valet Mode
Press two times and then
1
3
4
5
6
2
A U X
. The UNLOCK LED and Function
LED blink and remote beeps one time. When valet Mode OFF, the
remote beeps two-times.
Valet take over
Before turning off the engine, press and release . within 3
seconds. Then wait a few seconds.
Turn the ignition key to the OFF position.
The engine will remain running until the programmed time elapses
or a shut-down input is received.
Location of Valet button_________________________________
▀
▀
▀
▀
▀
Cut along dotted line and f
old f
or a quick and eas
y r
efer
ence to k
eep in pur
se or w
allet
.
✂
✂