Arcam – Arcam Alpha 9C User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical Soecifications
INPUTS
Line inputs:
Sensitivity 200mV
Noise (ref 800mV output)
-lOOdB typical
(“DIRECr
IN)
-98dB typical (“DIRECT’ OUT)
Input impedance
25kQ
Overioad marpin
>50dB
Frequency response
10Hz-20kHz ±0.5dB
Tone controls (typical range)
±6dB at 50Hz and 10kHz
L/R Crosstalk
>-65dBat1kHz
A/V loop Input (A/V mode)
Sensitivity 940mV
Input impedance
30kO
Phono board (if fitted):
Sensitivity S.OmV MM. 300uV MC
Noise (CCIR) ref 800mV output
-85dB MM. -75dB MC
Input impedance
47kO MM. 300Q MC
OUTPUTS
Main-Outputs
Nominal output level
800mV
Maximum output level
8V
Output impedance
10Q
Tape & Zone outputs:
Output level / gain
As per input signal / OdB
Output impedance
1.8 kO (Tape) 47Q (Zones 1 & 2)
Headphones:
Maximum output level into 600Q
8V
Output impedance
loon
Mains voltage
230V/115V ±12%
Power consumption(max)
20VA
Dimensions Vy/D/H mm.
430x310x110
Weight nett
packed
4.4kg
6.0kg
Supplied accessories
Mains lead
CR35 remote handset (inc. batteries)
E & O E .
ARCAM
Pembroke Avenue, Waterbeach, Cambridge, CBS 9PB, England.
Telephone: +44 (0)1223 203203 Fax: +44 (0)1223 863384 e-mail: [email protected]