Arcam A60 - Manual (Page 12)

Specifications
All input sensitivities, nominal output levels and noise figures refer to 35 watts into 8il at
1 kHz. All noise figures are CCIR/ARM weighted ref IkHz. These specifications refer to both
the A60+ and A60AP+ except where stated otherwise.
Inputs
Magnetic cartridge
Sensitivity 2 mV
Overload Margin > 38dB 20Hz - 20kHz
Noise < - 70dB
Frequency Response better than +0.3dB - 0.5dB 40Hz - 20kHz
typically ± 0.2dB 70Hz - 20kHz, — 2.5dB at 20Hz
Input Impedance 47kil, in parallel with lOOpF
Switchable loading module available to provide the following additional loads: 30kQ, 8kil,
200pF, 320pF, 420pF and user programmable option.
Moving coil cartridge (MC60 board fitted)
Sensitivity lOOjLtV
Overload Margin > 38dB at IkHz
Noise < —63dB
Input Impedance 3300 in parallel with lOOOpF
Switchable loading module available to provide the following additional loads:
lOOO, 300, lOO, lOOnF and user programmable option.
Tuner
Sensitivity lOOmV
Overload Margin infinite
Noise < -85dB
Input Impedance lOOkO
Compact Disc
Sensitivity 200mV
Overload Margin infinite
Noise < -85 dB
Input Impedance 10 kO
Tape
Sensitivity variable via adjustable preset controls lOOmV-lOV
Noise < -85 dB
Input Impedance 47kO - lOOkO depending on sensitivity setting
Power amp (A60AP+ only)
Sensitivity 600mV
Input impedance 20kO
Noise < -lOOdB
Gain to Loudspeaker terminals 29dB, phase non-inverting
Tone controls
Treble up to ± 8dB at 15kHz
Bass up to ± 8dB at 50Hz
High Filter turnover frequency 7.5kHz; slope 12dB/octave, Bessel (linear phase)
characteristic.
Outputs
Tape
Nominal output level lOOmV
Output Impedance 5kii
Tape monitor switch allows instant A/B monitoring
10