Schwinn Airdyne AD4 - Manual

Schwinn Schwinn Schwinn ® ® ® AD4 AD4 AD4 Airdyne Airdyne Airdyne
Assembly Assembly Assembly
Manual Manual Manual
003–3240.021510.A
Important Important Important Safety Safety Safety Instructions Instructions Instructions
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Obey the following warnings:
••• Read and understand all warnings on this machine.••• Carefully read and understand the Assembly Manual. ••• Keep bystanders and children away from the product you are
assembling at all times. ••• Do not assemble equipment in a wet or damp location. ••• Make sure assembly is done in an appropriate work space away from foot traffic and
exposure to bystanders.••• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do
steps that involve heavy lifting or awkward movements on your own. ••• Do not try to change the design or functionality of this machine. This could compromise the safety and
can void the warranty. ••• If replacement parts are necessary use only genuine Schwinn® replacement parts and hardware supplied by Nautilus. Failure to use genuine
replacement parts can cause a risk to users, keep the machine from operating correctly or void the warranty. ••• Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the Owner’s Manual. ••• Read and understand the complete Owner’s Manual supplied with this machine before first use.
Keep the Owner’s Manual for future reference. ••• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369,
[email protected] | Europe, Middle East & Africa 49 02203 2020 0, [email protected] | Germany & Austria + 49 02203 2020 0, Switzerland + 41 26 460 77 66, United Kingdom
+ 44 1908 267 345, Asia Pacific & Latin America (360) 859-5180, [email protected] | Patent information: This product may be covered by US and Foreign Patents and Patents Pending. See
Product for more information. | Printed in Taiwan | © 2010 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include
NAUTILUS®, BOWFLEX®, SCHWINN® and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners.
Before Before Before Assembly Assembly Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of
minimum 64.4” x 96.9” (163.6 cm x 246.1 cm).
Follow these basic points when you assemble your machine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
5. The assembly requires 2 people.
Specifications Specifications Specifications and and and TTTools ools ools
Not Not Not Included Included Included
1/4”
5/16”
15mm
(recommended)
#2
(recommended)
111