Xerox 7024 - Manual (Page 73)

SENDING
8 . Use the terminal keypad to enter the two digit mail box
number for the remote terminal and press {Enter].
SEND SECURE MAIL
PASSWORD:
9. The password is not necessary for a secure mail transaction.
• If no password is desired, press [Enter].
• If a password is desired, use the terminal keypad to enter
the four digit password of the remote terminal mailbox
and press [Enter],
SEND SECURE MAIL
NUMBER OF PAGES:
10. For an automatic page count, press [Enter].
Note: If desired, use the terminal keypad to enter the exact
number of pages in your document, including the cover page
before pressing [Bnter]. The terminal compares this number to
the number of pages transmitted.
SEND SECURE MAIL
ENTER FAX NUMBER
11
,
Use the terminal keypad, one-touch key or speed dial key to
enter the telephone number. Press [Clear] to erase a
character.
SEND SECURE MAIL
555-4545
12. When the telephone number is entered, press [Enter].
SEND SECURE MAIL
ENTER DAY:
01,14:55
13. If you want the operation to start immediately, press [Enter],
If you want a specific start date and time, enter using the
terminal keypad.
• Enter the desired date and press [Enter].
• Enter the hour, in 24 hour format, and press [Enter].
• Enter the desired minutes and press [Enter].
SEND SECURE MAIL
COMPLETED
Note: If you requested transmission from memory, the terminal
will scan the document into memory. If you reach a memory full
condition, an alarm will sound and a memory full message will
be displayed. Press [Bnter] within one minute to store all
scanned originals. Any partial page will be deleted. Press [Clear]
to delete all stored originals. Failure to respond within one
minute results in the cancellation of the Job and an error
message report will be printed.
If a specific time was entered, the display will flash DELAY START
PENDING.
TELECOPIER 7024 USER HANDBOOK 3-9