Polaris PR199-100-3NV User Manual
Year residential polaris, Year tank warranty 1 -year parts warranty, High-efficiency residential gas water heater
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
brought to Canada by
Requires 120 Volt 60Hz Power Supply.
Draws less than 5 Amps
NOTE: SEE INSTALLATION MANUAL FOR PIPING DIAGRAMS.
N T
3 1/2" DIA. -T
CONCENTRIC VENT KIT
(OPTIONAL)
10-Year Residential Polaris®
Note: Dimension *G’ = 5 3/4"
MODEL NUMBER
TANK
CAP.
(GAL.)
INPUT
BTU
PER
HOUR
THERMAL
EFFICIENCY
G.P.H.
REC.
90'
RISE
EXTERIOR
A B
1 " WATER
CONNECTIONS
C D
T&P
HGT.
E
1/2"
GAS
SUPPLY
F
APPROX.
SHIP
WT.
PR100-34-2NV
34
100,000
96
129
48.5
22
15.75
40.5
41
6-1/8
150
PR130-34-2NV
34
130,000
96
166
48.5
22
15.75
40.5
41
6-1/8
150
PR130-S0-2NV
50
130,000
95
166
62.5
22
15.75
54.5
55
6-1/8
176
PR150-34-2NV
34
150,000
95
186
48.5
22
15.75
40.5
41
6-1/8
150
PR199-100-3NV
100
199,000
96
257
70
28
23.25
56.25
63
6-3/8
486
For propane, substitute “P” for “N" in the modei number. 3" Concentric Vent Part #6910543 or 2" Concentric Vent Part #6910542. Specifications are
subject to change without notice in accordance with our poiicy of continuous improvement, input, output and recovery may vary depending upon air
iniet and exhaust outlet instaliations. Length and number of bends in inlet and outiet pipes may reduce input and output. Consult instaiiation,
operation and service manual for details. Dimensions on all charts shown in inches.
Specification
Residential gas-fired water heater(s) shall be a direct/power vent Polaris model
_______ as manufactured by American Water Heater Company and shall have a 10-
year limited tank warranty and a 1-year limited parts warranty, as outlined in the written
warranty. Units shall be designed to burn_________ (natural/propane) gas and be CSA
International certified to the latest edition of ANSI standard Z21.10.3/CSA 4.3. Water
heater(s) shall have a nominal storage capacity of______ gallons and a recovery rate of
____ GPH @ 90PF rise with a rated input of________ BTU/Hr. Water heater(s) shall be
condensing type with a minimum thermal efficiency of 95-96%, power vented with PVC,
ABS, or CPVC pipe. Water heater(s) shall have combined vent capabilities of up to 120'
to the exhaust outlet with up to 120' to the air inlet. Water heater(s) shall have a low
noise combustion system with a woven fibre steel burner capable of low NOx (less than
40 ng/j) in the blue flame mode and shall be manufactured of refractory steel, resistant
to thermal and mechanical shock. The gas valve shall be a Honeywell CV1-r1 series
gas valve with a matching 45.900 series venturi manifold using a 1:1 air/gas ratio. The
combustion system shall be factory adjusted and require no field adjustment on
startup. The tank shall be constructed of 444 stainless steel with a submerged
combustion chamber and rated for 150 PSI working pressure and 300 PSI test
pressure. The tank shall be surrounded by two inches of non-CFC foam insulation
covered by an enamel coated metal jacket. Operating controls shall have a 24-volt
integrated control circuit, an immersed thermistor temperature sensor, a recycling
energy cut-off switch, external temperature adjustment, and shall have LED lights that
continuously indicate the operational status of the water heater(s). A microprocessor
shall automatically monitor nine critical operating functions and signal the status of
each. A factory installed temperature and pressure relief valve shall be provided on all
models. A factory provided water thermostatic tempering valve shall be provided with
all models.
Order Entry and Sales
GSIV Water Heating
A GSIV Inc. Company
599 Hill Street West,
Fergus, ON, Canada N1M 2X1
Tel: 1-888-599-2837
Product Service and Support
P.O. Box 1597, 500 Princeton Road
Johnson City, TN 37605-1597
Tel: 1-800-456-9805
Fax: 1-800-999-5210
Distributed By
brought to Canada by
HIGH-EFFICIENCY RESIDENTIAL GAS WATER HEATER
10-Year Tank Warranty
1 -Year Parts Warranty
•Stainless Steel Tank with Submerged Combustion
High grade 444 stainless steel tank with brass connections for years of dependable,
trouble-free service - no anode required. Submerged combustion chamber with
spiral flue for 95-96% thermal efficiency and ultra-low standby heat loss of
approximately 1%.
•Sealed Combustion with Woven Fibre Premix Burner
Metal fibre burner is designed for clean combustion in high-intensity blue flame
mode. Manufactured of refractory steel that resists corrosion. Excellent resistance to
thermal and mechanical shock, even at extreme temperatures. Uniform combustion
provides excellent heat transfer. Meets Low NOx requirements for California
and Texas.
•Whisper Quiet Operation
Ultra quiet blower and burner minimize noise.
•Power/Direct Vent Using 2" or 3" Plastic Pipe
Direct vents up to 120' using PVC, CPVC, or ABS pipe. Vents through-the-wall or
roof. Optional concentric vent kit available for use through-the-roof or wall.
•Plug-and-Play Technology
No special adjustments are required at initial start up. Connect air inlet, exhaust
outlet, water, electricity, and gas, set the temperature and the system functions
properly.
•Self-Diagnostic Control System
Three external LED lights indicate operational status of water heater. Microprocessor
monitors nine critical functions. An LED troubleshooting light, visible through view
port, signals heater operation status.
•Full Serviceability from the Front
Removal of two front-located access panels exposes all serviceable components.
Modular components are easily removed.
•Multiple 1" Tank Connections - Brass
Potable water and space heating connections provided. Use with potable water only.
•Factory Provided Tempering Valve
Helps stretch hot water supply by automatically mixing hot and cold water.
•Other Features
Thermister Temperature Sensor
Hot Surface Ignition
ASHRAE 90.1 b-1992 Compliant
Factory Installed T&P Valve
Complies with California Title 24
24-Volt Thermostat Control
Full Flow Brass Drain Valve
Zero Clearance to Combustibles
Factory Provided Condensate Trap (CPVC)
•CSA International Certified to ANSI Z21.10.3/CSA 4.3
Copyright© by American Water Heater Company
2002. Aii rights reserved.
All rights reserved. No port of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heater Company.
12/05
RP133C
All rights reserved. No port of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any inhumation storage retrieval system, without permission in writing from American Water Heater Company.
12/05
RP133C