Wiko STAIRWAY - Manual (Page 35)

access points. Choose the one that matches your opera-
tor’s by pressing on the button on the right, then press on
RETURN
to go back to the previous menu.
• APN Not Available
If your operator does not appear in the list or the list is
empty, ask your operator how to configure the APN man-
ually. To do this, press on the menu button, then
New
APN and enter the information provided by your operator.
Press on the MENU
button again and choose save.
Return to the previous menu, then choose the APN that
you have just saved.
• Enabling Data Connection
To check your data connection settings :
1. Go to settings > WIRELEss & NETWORks> More… >
Mobile networks > Access point names, then enable the
access point according to your operator/package.
2. Return to the previous mobile network settings menu,
then press on Data connection and press on the name of
your sIM card to enable it.
*You can also drag the notifications panel downwards to
enable a data connection.
• 3G Service
If you have two sIM cards inserted, only one of them can
be enabled to receive the 3G service. You are advised to
enable sIM1 for the best performance. If you want to
change sIM, go to
settings > WIRELEss & NETWORks
> More… > Mobile networks > 3G service > Enable 3G.
• Data Roaming
Note that for roaming sIM cards, you must enable the
data roaming in the
settings > sIM management > BA -
sIC sETTINGs > Roaming menu. Otherwise, the internet
connection will be disabled by default.