USL XTD-680 - Manual (Page 7)

- -
XTD-680 CROSSOVER SETUP
Connect to the XTD-680 using the connect icon.
Select “Biamp” or “Triamp”,
Upon connection to the XTD-680,
the window at the bottom right of
the main screen changes from
to
The software starts, by default, in Triamp. If you wish to switch to Biamp, a warn-
ing window appears prompting you to change the speaker. When connected, the
system will automatically mute the stage channels only at this time.
Clicking on the “Default Triamp” button will bring up a Speaker Library.
NOTE: “DEFAULT Triamp is a speaker selection and is the default one in the setup
program. If you change your speaker selection (see next page), the label on this
button will change to that selection.