beautypg.com

Installation – StarTech.com TB2USB3ES User Manual

Page 5

background image

Instruction Manual

2

Installation

1. Connect the attached Thunderbolt cable to your host computer.
2. The operating system should detect the device and automatically install it using

native drivers.

Note: On Windows systems, you may see the following message requesting permission

for the device to connect. Please click on the message, and on the following prompt,

select Always Connect from the drop-down to enable the device.

3. Once installation is complete, connect your eSATA cable and / or a USB device to the

adapter.

Note: If connecting a USB hub to the adapter, it must be a powered hub.

See also other documents in the category StarTech.com Hardware: