StarTech.com CPNTUTPEXT - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/17/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 2 x Component Video Extenders (local and remote ends)
• 1 x 20cm Component Video cable
• 1 x Installation/Mounting Kit
• 1 x User Manual
System Requirements
• A Component Video Source
• Input and Output Component Video cables
• A display with an available Component Video inputy
CPNTUTPEXT
Component Video Extender over Cat 5
*actual product may vary from photos
Basic Setup
1. Connect the Component Video cable to the outputs on the back
of the video source.Connect the opposite end of the Component
Video cable used in Step 1 to COMPUTPEXTA local unit.
2. Connect the opposite end of the Component Video cable used in
Step 1 to CPNTUTPEXT local unit (marked Y, Pb, Pr respectively).
3. Connect the Cat5 cable to the RJ45 port on CPNTUTPEXT local
unit (marked RJ-45 Balanced Component Video).
4. Connect the opposite end of the Cat5 cable to the RJ45 port on
the CPNTUTPEXT remote unit.
5. Connect a second Component Video cable to the designated
ports on the output SVIDUTPEXT unit (marked Y, Pb, Pr).
6. Connect the remaining end of the Component Video cable to
the monitor/display. For further instructions on how to locate
the Component Video ports on your display, please refer to the
documentation that accompanied the display at the time of
purchase.
Specifications
Certifications
(Regulatory etc.)
FCC, CE, WEEE, RoHS
Connectors
Input: 1 x RJ45
1 x Component female
Output: 1 x RJ45
1 x Component female
Dimensions (LxWxH) 110 x 77 x 24mm
Weight 460g (1.014 lb)
Maximum Resolution 480i/480p/720p/1080i