SIG SAUER P226 X-Five - Manual (Page 14)

24 USA 25 USA
9.3.2 Function sequence with case
ejection and hammer cocking
– Sear spring presses sear 2 and
safety lever 5 into their initial
positions.
– The empty case H is removed by
the extractor 53 and expelled by
the ejector 41.
– As the slide 50 recoils up to its
stop, it cocks the hammer 7 and is
then caught in the SA notch by
the sear 2.
– The slide 50 is pushed forward
with the pressure of the compre-
ssed recoil spring 62 and the next
round is fed in (see section 9.1.2).
The barrel 57 locks up with the slide
50 again.
The pistol is ready to fire.
The hammer 7 is cocked.
Functioning
Fig. 20, case being ejected
Functioning
57 H 53 5
50
2
62 41
7
9.4 Function sequence after
discharging last round
– Blowback force generated with the
discharge thrusts the slide 50 to the
rear to stop.
– In the empty magazine, the magazine
spring 71 raises the feeder 70 and
also pushes up the slide catch lever
26. Slide catch lever 26 registers in
the notch of the slide 50.
– Slide 50 remains in its open position.
Fig. 21, slide is held open when magazine is empty
50 26
71
70