Samson Wheateena Workhorse II - Manual (Page 2)

OUTLET SCREW: FUNCTION & ADJUSTMENT
The outlet screw regulates the pressure applied to whatever you are juicing inside the cylinder. Turning the
outlet screw clockwise (right) increases pressure by reducing the outlet for pulp expulsion. Turning
counterclockwise (left) decreases pressure by enlarging outlet for pulp expulsion. The object is to secure the
maximum amount of juice with the driest pulp. Usually, exposing two or three threads is a good adjustment.
Over tightening of the outlet screw will cause the juicer to clog, will stress the motor and will cause
unnecessary ware on the parts. Experience is required for the best adjustment for different vegetation.
STRAINER
The strainer supplied is made of stainless steel, with holes suitable for most ordinary use. When extracting
large quantities of juice, the strainer should be removed occasionally and the wholes cleaned. For juicing
sprouts the optional large hole strainer can be ordered.
MOTOR
Always unplug the motor first in the event of a stall or clog. Failure to do so could result in serious injury. The
motor is equipped with automatic overload protection and will shut off if it gets too hot. If this happens
unplug immediately. If the machine stalls turn it off immediately and check for a clogged cylinder or strainer.
Often times this will happen if the outlet screw or lockring is on too tight.
NOTES
A. When the juicer is in place and motor on a small oscillating movement is normal.
B. The feedscrew will tend to polish or slightly rub the strainer during operation.
C. If dark material is formed during the initial operation make sure the bearing is lubricated and that
the lockring and outlet screw are not over tightened.
D. Always unplug unit from the electrical supply in the event of a clog, stall or shut down. Keep
fingers away from all moving parts.
WARRANTY STATEMENT
Samson Brands warrants that the Wheateena WorkHorse II will be free from latent defects in material and
workmanship under normal use and service for one (1) year. Samson Brands solely will determine after
examination whether any part or workmanship is defective. This does not apply to any products repaired or
altered by anyone other than Samson Brands or subjected to abuse or misuse. A machine determined to be
defective must be returned to Samson Brands, freight prepaid. Do not return any machine unless authorized
by a Samson Brands customer service representative.
Always unplug the unit before attempting to disassemble or assemble when motor has stopped, stalled or
shut off. Failures to do so could result in serious injury should the unit suddenly or unexpectedly turn on.
Always keep fingers, loose clothing or hair away from moving parts while machine is in use. Do not attempt
to unclog without turning off the switch and unplugging the unit. Never use fingers or any other objects
other than plungers to push the grass into the machine, serious injury could result.
FOR INDOOR USE ONLY