MIDI Solutions Event Processor - Manual (Page 3)

Thank you for purchasing the MIDI Solutions Event Processor.
The MIDI Solutions Event Processor offers 10 settings, each of which can be programmed to perform a different MIDI
processing function. The Event Processor is MIDI-powered and requires no batteries or power supply to operate.
INTRODUCTION
To program the Event Processor connect the MIDI Out from your MIDI interface to the MIDI of the Event
Processor. The MIDI can be left disconnected during programming.
Once the Event Processor is programmed, it can be inserted wherever it is required in your MIDI setup. Connect the
MIDI Out or Thru of the sending device to the MIDI
of the Event Processor, and the MIDI of the Event
Processor to the MIDI In of the receiving MIDI device. It is recommended that the number of MIDI Solutions products
powered by a single MIDI Out or Thru be limited to four.
Upon receipt of a programming command, the Event Processor's MIDI indicator LED flashes rapidly for about one
second to indicate that the setting has been stored. Settings are retained after power is removed, and the unit can
then be inserted wherever it is required in your MIDI setup.
The Event Processor's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes
whenever MIDI data passes through the unit. Each
All unprocessed MIDI events are sent unchanged to the MIDI Out.
In
Out
In Out
The Event Processor offers 10 settings, each of which can be programmed with a unique MIDI processing function.
The Event Processor is programmed by sending it MIDI System Exclusive programming commands from a computer
with a MIDI interface. These commands are described in detail on the MIDI Solutions website, however
(see www.midisolutions.com/support.htm).
MIDI event received is compared with each of the Event
Processor's 10 settings, beginning with setting #1. If a MIDI event matches a setting, the event is processed
according to that setting.
the
Programming Tools software creates these commands automatically
CONNECTIONS
PROGRAMMING
OPERATION
3
Receiving Device
MIDI In
Sending Device
MIDI Out or Thru
MIDI Solutions TM
Made in Canada
MIDI
In Out
Processor
Event
Processor
MIDI Indicator LED