Canon CP 220 - Manual (Page 30)

30
1
Connect one end of the USB cable to the USB port on the printer,
and the other end to a USB port on your computer.
• There is no need to turn off the printer or your computer.
• When connecting the printer to your computer, make sure the connectors on
the ends of the USB cable match the ports on the printer and your computer.
• For the location and direction of your computer’s USB port, refer to the
documentation provided with your computer.
2
The first time the printer is connected to your computer, the Add
New Hardware Wizard dialog (Windows 98 (p.8) / Me (p.13)) or
Found New Hardware Wizard dialog (Windows 2000 (p.17) / XP
(p.21)) appears and installation starts.
When disconnecting the USB cable, you do not need to turn off the
printer or your computer.
USB port
on computer
USB cable