Intex Ladder with Removable Steps For 52in (132 cm) - Manual (Page 7)

(165PO) 42”, 52" LADDER WITH REMOVABLE STEPS ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 07/01/2012
165
PO
SAVE THESE INSTRUCTIONS
Page
English
7
SETUP
INSTRUCTIONS
LADDER SETUP
These assembly instructions are the same for the 3-step and 4-step
ladders. The assembly drawings show the 4-step ladder.
TOOLS REQUIRED: One (1) Phillips screwdriver
One (1) pair of pliers or a small adjustable wrench
IMPORTANT: Do not fully tighten fasterners until last assembly operation.
WARNING
ASSEMBLE THE LEGS BEFORE INSTALLING THE LADDER STEPS.
FAILURE TO ASSEMBLE THE LEGS BEFORE INSTALLING THE
STEPS MAY ALLOW THE LEGS TO SEPARATE FROM THE LADDER
DURING USE, POSSIBLY RESULTING IN SERIOUS INJURY OR
DEATH. INCORRECTLY CONNECTED PARTS MAY RESULT IN AN
UNSTABLE LADDER OR LADDER FAILURE WHICH CAN CAUSE
FALLING AND PERSONAL INJURY OR DEATH.
1. SIDE C LEGS ASSEMBLY (refer to figures 1.1 through 1.4):
IMPORTANT: Make sure the legs are securely connected and locked. Check
the spring pins have snapped out before proceeding to the next step.
C
1
2
C
C
C
C
C
C
C
C
1
2
C
C
C
C
C
C
C
14
15
14
15
C
1
2
C
C
C
C
C
C
C
C
C
Spring pin
1.1 aa
C
1
2
C
C
C
C
C
C
C
14
13
Press,
hold and
insert
1.3 1.4