Interlogix NX-8V2 REV H Installation Manual - Manual (Page 49)

Chapter 2: Reporting codes
NX-8V2 Control Panel Installation Manual 45
day programmed. The default is to begin daylight saving time on the second
Sunday in March and end on the first Sunday in November.
Segment 1 - Daylight saving time starting month (1 to 12). Default is 3.
Segment 2 - Daylight saving time starting Sunday (1 to 4, first to fourth). Default is 2.
Segment 3 - Daylight saving time ending month (1 to 12). Default is 11.
Segment 4 - Daylight saving time ending Sunday (1 to 4, first to fourth). Default is 1.
Locations 85 to 87 - Reserved
Locations 88 to 109 - Partition account codes and
features.
If a location is left unprogrammed, the feature for partition 1 and account code for
the phone number will be used.