beautypg.com

Micro sd card installation, 3 micro sd card installation – IC Realtime 1. 3Megapixel 2.8-12mm VF D-WDR HD Vandal-proof IR Network Dome Camera (ICIPD1300VIR) User Manual

Page 30

background image

24

Step 2

Before you go to the Step 4 in the chapter 3.2.1 installation steps, please pull through cable with the

waterproof airproof plug to the device chassis via the installation hole at the bottom of the chassis and

then connect the cable pins.

Step 3

Refer to Step 4 and Step 5 in the chapter 3.2.1 installation steps to install and connect the cable pin to

the device and then follow the proper steps to go on the installation.

Important

This series product has the power connection pin and I/O connection pin for you to pull through

the signal cable.

3.3 Micro SD Card Installation

Warning!

Please unplug the device power cable and then shutdown the device before you install the Micro

SD card.

Step 1

Please refer to Step2 in chapter 3.2.1 installation steps to open the device protection enclosure.

Step 2

Please find the

“SD” mark inside the device and adjust the Micro SD card direction according to prompt

direction. Insert the card to the slot and then install the Micro SD card. See Figure 3-11.

Figure 3-11

Step 3

Please refer to Step 7 in chapter 3.2.1 to put the device protection enclosure back.