Uniden PC33X - Manual (Page 7)

OPERATOR TROUBLESHOOTING
Should the unit malfunction or not per­
form properly, the operator should per­
form the procedures indicated below;
1. If the transceiver is completely inop­
erative.
* Check the power cord and fuse.
2. If trouble is experienced with receiv­
ing.
* Check ON/OFF VOLUME CON­
TROL setting.
* Be sure SQUELCH is adjusted
properly. If the radio over­
squelched?
* Check to see that the radio is
switched to an operational mode.
3. If trouble is experienced with trans­
mitting.
* Check to see that the transmission
line (coaxial cable) is securelycon-
nected to the ANTENNA CON­
NECTOR.
* Be sure that the antenna is fully
extended for proper operation.
* Be sure that all transmission line
(coaxial cable] connections are se­
cure and free of corrosion.
We highly recommend that you consult
a qualified radiotelephone technician
for the servicing and alignment of this
CB radio produa.
Please refer to the WARNING informa­
tion contained in this Owner's Guide.
(NOTE: When ordering parts, it is es­
sential to specify the correct model
number and serial number of the unit.)