Example connection for a dvd/ld or ld player, Memo – Pioneer VSX-D710S User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting Your Equipment

Example Connection for a DVD/LD or LD Player

Since some LDs have soundtracks recorded on the special □□ RF format you need to make special hook ups to ensure

you can play all LDs on your system If you don't have an LD (or an LD player with your DVD player) you don't need

to worry about this For the VSX-D710S/D810S/D850S hook up your DVD/LD or LD player directly and make sure

you make both a DO RF output and either a coaxial or optical digital connection Of course you must hook up your

DVD/LD or LD player with standard (coaxial or optical) digital connections but if you are able to hook up your player

with a HI RF output (if your player has one) this will ensure you can use all LDs available We also recommend
hooking up your digital components to analog audio jacks as well

Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall
outlet The diagram is for the VSX-D850S but hook up an RF Demodualtor to the VSX-D710S in the same manner

The arrows indicate the direction of the audio signai

RF demodulator RFD-1

DVD/LD player

or LD player

MEMO:

Be sure to make either a digital coaxial or digital optical connection as well, but you don't need to make both Make
sure the RF demodulator digital in switch is set correctly (optical or coaxial depending on the connection) See the

component's instruction manual if you are unsure about its input and output jacks