Brother FAX-400 - Manual (Page 81)

III-6. CONNECTING YOUR FAX TO THE POWER OUTLET
6. CONNECTING YOUR FAX TO THE POWER OUTLET
Important
The machine must always be connected to the power outlet
before you connect it to a telephone line.
Similarly^ when moving the unit^ the telephone line connection
should be removed before unplugging the power cord. This is
because the machine relies on the ground from the plug to
protect you from any hazardous electrical conditions occuring
on the telephone network.
This machine can be plugged into any standard grounded power
n i T t l e t .
Make sure the socket is grounded and that it is not on the
same line as any large appliances or office machines such as
refrigerators or photocopiers. The power requirements for this fax
machine can be found in the
Specifications section on page VIII.
There is no ON/OFF switch. When the machine is plugged in, the
date/time display appears on the LCD. You can set the correct time
and date on this display by following the
instructions on page IV-
1-1 in the section Configuring the machine.
- When the machine is plugged in, the recording paper will he fed
through the feeder automatically.
ni-6-1