beautypg.com

Darning, Temporary sewing by machine, Free basting method – Kenmore 17922 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

DARNING

SETTINGS

Stitch Length - 8 to 10
Pressure Regulator - 0 (DARN)
Zigzag foot or square automatic buttonhole

foot

Stretch fabric between embroidery hoops

with hole centered. Lower presser bar and
sew at a slow speed moying fabric back and
forth with a steady rhythm to cover darning
area. When it is covered, turn fabric 1/4 a

turn and sew layer of stitching across first
layer.

If fabric is thin or badly damaged in hole area,

you may want to put a separate piece under

the hole for reinforcement.

TEMPORARY SEWING BY

MACHINE

Regular basting by machine is easy —simply

use straight stitching with longest available
length setting. And your machine has a free
basting method for very long stitches that
sometimes can be used for "marking”.

FREE BASTING METHOD

SETTINGS

Basting switch - turn on
Pressure regulator - 0 (DARN) or 1

Use feed cover plate.

Tap the foot control and the machine will
take one stitch and stop automatically with
the needle in the up position. Holding the
fabric in both hands, pull it back to the

required stitch length.

Repeat this process, tapping down on the

foot control and guiding the fabric with your

hands.

Regular Basting

Free Method

30

This manual is related to the following products: