GE 56765 GE Indoor Outlet Receiver with Motion Sensor Smart Remote Plus Compatible User Manual
 warning, Users manual, For indoor use only
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/664455/1/background.png)
Automatic Security Light Kit
Outlet Adapter wiÈ Motion-Sensing Control
Users Manual
Enclosed you will find
‘(1) Motion-Sensing Control
♦ Mounting Hardware
•(1) Indoor Outlet Adapter
The GE Smart Remote PI us advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver—the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
Questions?
Call 1-800-443-4924
or visit us at
eC^us
usiED
Y
R
E
u
u
 WARNING
Risk of electric shock
* Keep children away
* Do not use in wet locations
Risk of fire
* Do notexceed electrical ratings
The following GE Smart Remote Plus transmitters (sold separately) can control your receiver;
IN
cluded
-
Key Chain Remote Wall Mount Control Whole-Home Control Modon-Sensing Control Garage Control
RFWOTXPS RfmiXPS RF2000KINPS
RFd13TX COMING SOON!
The transmitters above can also control the following GE Smart Remote Plus receivers (sold separately);
include
*^'
Indoor Outlet Outdoor Outlet Socket Adapter Wall Switch Garage Adapter Dimmer Switch
RFWORXPS RFW6RXPS RFI04RXPS RFW2RXPS COMING SOONI COMING SOONI
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
To extend the range of the
transmitters and receivers
in your system, use the
GE Smart Remote Plus
Range Extender
(sold separately).
Range Extender
RFWORXrX
Expanding your system
The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels are
easy to set/ adjust - with the simple turn of a knob. Set up your GE SmartHome™ by purchasing as
many transmitters and receivers as you need. The following table is just one example of howyou
can configure your Smart Remote Plus system:
Area
CH
Transmitters
Receivers
Bedroom
1
Bedside - Wall Mount Control
Entrance - Wall Mount Control
(2) Bedside Lamps -(2) Socket Adapters
Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room
2
Coffee Table - Timer/Controller
Entrance - Wall Mount Control
(2) End Table Lamps - (2) Socket Adapters
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3
Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement
4
Entrance - Wall Mount Control
(4) Overhead Can Fixtures -(4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage
5
Entrance - Wall Mount Control
(2) fluorescent Fixtures - (2) Outdoor Outlet Adapters
Overhead Ught Fixture - Wall Switch
Outdoor
6
Foyer-Wall Mount Control
Car Keys - Key Chain Remote
Entry Light-Wall Switch
Coach Lantern - Wall Switch
7
Christmas Ughts - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter
Kitchen
8
Entrance - Wall Mount Control
Coffee Maker - Indoor Outlet Adapter
Operating Instructions - Indoor Outlet Adapter
FOR INDOOR USE ONLY
1. Remove the small tab on the back of unit labeled HOUSE CODE
using a small screwdriver.
2. Set the HOUSE CODE to anyone of the following settings:
B
NOTE: Make sure All your GE Smart Remote Plus devices have the same HOUSE CODE setting. The
transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on/off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Replace HOUSE CODE tab.
4. Set the CHANNEL by using knob on front as shown.
NOTE: If you set your Indoor Outlet Adapter to CHANNEL 1,
the unit can be controlled using any transmitter set to CHANNEL 1. If you set your Indoor Outlet Adapter
to CHANNEL 2, the unit can be controlled using any transmitter set to CHANNEL 2... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
HOUSE CODE and CHANNEL settings.
5. Plug Indoor Outlet Adapter into a powered, grounded 125VAC outlet.
6. Plug the lamp / appliance you wish to control into the Indoor Outlet Adapter as shown.
The following are examples of devices you can control with your Indoor Outlet Adapter;
©
COfFEEMAKER
lAMP
FAN
TORCHIERE CHRISTMAS TREE SURGE PROTECTOR
CAUTION: WHEN THE INDICATOR LIGHT IS ON, THE OUTPUT OUTLET IS POWERED.
DO NOT CONNECT/ DISCONNECT DEVICES TO / FROM THE OUTLET ONCE IT IS POWERED.
Operating Instructions - Motion-Sensing Control
1. Slide battery cover off the bottom of the unit and install
a new 9V alkaline battery.
2. Replace the battery cover.
3. Remove the small tab on the bottom of the unit labeled
HOUSE CODE using a small screwdriver.
4. Set the HOUSE CODE to any one of the following settings:
A B C D
5. Replace house code tab.
6. Set the CHANNEL by using the knob on the top as shown.
NOTE: If you set your Motion-Sensing Control to CHANNEL 1,the unit can
control any receiver set to CHANNEL 1. If you set your Motion-Sensing Control
to CHANNEL 2, the unit can control any receiver set to CHANNEL 2... and so on.
7. You have the option of disabling the unit during the daytime
by changing the ACTIVITY SETTINGS switch on the bottom
of the unit. The diagram at the right explains the settings;
Night 24-hour
8. Mounting
operation only operation
NOTE; Mounting Motion-Sensing Control on masonry or metal walls may degrade functional range.
A. Attach the mounting bracket to the wall or ceiling using the screws provided.
B. Snap Motion-Sensing Control into mounting bracket
Motion is detected in a 50' x 100‘
CWEBAGEAREA
MOUNTING BRACKET
Also, walking in a straight line towards the Sensor may reduce
the detection range. Walking across the detection field provides
maximum results.
100
*
SidetoSi^e
When motion is detected and the Motion-Sensing Control is enabled, the unit will send an "on"
signal. Approximately 90 seconds later, the Motion-Sensing Control wil I send an "off" signal.
Receivers operating on the same HOUSE CODE and CHANNEL will respond to both signals.
Controlling Outdoor Fixture Lights
You have the option to control outdoor fixture lights directly by purchasing the GE Adapter Add-On
(PIR612AS). Thus, you can control GE Smart Remote Plus receivers remotely and outdoor fixture
lights directly, atthe same time.
1. Screw the Socket Adapter into the light socket and then screw light bulb into Socket Adapter.
NOTE; Maximum bulb wattage is 150W per socket.
2. Plug the phone-type connector into either of the
jacks atthe bottom of the Motion-Sensing Control
housing. Since you have two jacks, you can add
up to two Adapter Add-On units.
If your unit does network properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at
to download application notes, manuals and to find out more about the GE SmartHome'” product line!
Specifications - Motion-Sensing Control
Battery Type........................................................................... Use ONLY 9V Alkaline
NOTE; The functional range will decrease as the battery wears out so make sure to replace the
battery every 6 months for best results.
Specifications - Indoor Outlet Adapter
FOR INDOOR USE ONLY
DO NOTEXCEED ELECTRICAL RATINGS
Electrical Rating.................................................................................... 120V,60Hz
Maximum Resistive Load.............................................................................. 1200W
Maximum Tungsten Load............................................................................... 600W
Maximum Motor Load. ................................................................................. 1/3 H P
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions;
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION; Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
Made in China for GE Home Electric Products, Inc.
Nela Park, Cleveland, OH 44112
Desc.: PIR612TX