Warning, Customer responsibility, Maintenance and repair instructions – Craftsman 9096-31B202 316350840 User Manual

Page 15

MAINTENANCE AND REPAIR INSTRUCTIONS

MAINTENANCE SCHEDULE

Perform these required maintenance procedures at the fre-
quency stated in the table. These procedures should also
be a part of any seasonal tune-up.
NOTE: Maintenance, replacement, or repair of the

emission control devices and system may only be
performed by a Sears or other qualified service
dealer.

NOTE: Maintenance, replacement, or repair of the emis-

sion control devices and system may be per-
formed by a Sears or other qualified service dealer.

To prevent serious
injury, never perform

maintenance or repairs with unit running.
Always service and repair a cool unit.
Disconnect the spark plug wire to ensure that
the unit cannot start.

WARNING:

A good preventive maintenance program of regular inspection and care will increase life and improve performance of your
chain saw. This maintenance checklist is a guide for such a program.

Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than
those indicated.

CUSTOMER RESPONSIBILITY

CHECK FOR LOOSE SCREWS/
NUTS/BOLTS

CLEAN OR REPLACE THE AIR FILTER

REPLACE SPARK PLUG
REPLACE OIL / FUEL FILTER

CLEAN, INSPECT SPARK PLUG
ARRESTOR SCREEN / MUFFLER

CHECK GUIDE BAR AND CHAIN OIL,
FUEL HOSES

CLEAN UNIT AND INSPECT DECALS

CHECK CHAIN BRAKE® COMPONENTS

CLEAN GUIDE BAR GROOVE

CHECK FOR DAMAGED / WORN PARTS

CHECK CHAIN TENSION

CHECK CHAIN SHARPNESS

LUBRICATE SPROCKET TIP

CHECK FUEL MIXTURE

ITEM

BEFORE EACH USE

MAINTENANCE CHECKLIST

AFTER

EACH USE

HOURS OF OPERA-

TION