beautypg.com

Security feedback – Buick 2002 Park Avenue User Manual

Page 76

background image

2-13

Security Feedback

This feature provides feedback to the driver when the
vehicle receives a command from the remote keyless
entry transmitter. The following modes may be selected:

Mode 0: No feedback when locking or
unlocking vehicle.

Mode 1: No feedback when locking; exterior lamps
flash when unlocking vehicle.

Mode 2: Exterior lamps flash when locking; no
feedback when unlocking vehicle.

Mode 3: Exterior lamps flash when locking and when
unlocking vehicle.

Mode 4: Exterior lamps flash and horn chirps when
locking; no feedback when unlocking vehicle.

Mode 5: Exterior lamps flash and horn chirps when
locking; exterior lamps flash when unlocking vehicle.

Each remote keyless entry transmitter can be
programmed to a different mode according to the user’s
preference. To change to another mode do the following:

1. Press and hold LOCK on the power door lock switch

on the door throughout the procedure.

2. Press the trunk button on the transmitter. The horn

will chirp and the transmitter will remain in its
current mode.

3. Press the trunk button again. Each time the trunk

button is pressed, the horn will chirp and the
transmitter will advance to the next mode.

4. Release the power door lock switch.

If your vehicle is equipped with the Driver Information
Center (DIC), you can also program these features through
the DIC. See “Driver Information Center (DIC)” in
the Index.