BoomChair WIFX User Manual

Page 7

CLEANING/CARE INSTRUCTIONS

Fabric: Use a clean cloth to dab lightly with soap and water. DO NOT rub.

DO NOT immerse in water. DO NOT use detergent.

If a problem occurs while using this product, please contact us. DO NOT open unit or attempt to repair on your own. It may result in

serious injury from electric shock and void your product warranty.

MAINTENANCE AND REPAIR

Q: Why isn’t there sound coming from any of my speakers?

A: Ensure your BoomChair™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is

turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up. If using wireless connection, make sure the

transmitter and BoomChair™ are set to the same frequency. Make sure wireless transmitter has fresh batteries and is turned on.

Q: Why isn’t there sound coming from one of my speakers?

A: Ensure the audio cord to the BoomChair™ is securely connected as described in the Setup Guide. Make sure that both the left and

right channel audio inputs and outputs are securely connected to the BoomChair™ and audio device.

Q: Why don’t the LED lights respond when using battery power?

A: When using D cell batteries to power your BoomChair™, the LED lights will not be as responsive as when using AC power. This is to

conserve the life of your batteries. The LED lights will respond better if the volume of the input device (MP3 player, video game, etc.) is

set to maximum volume.

Q: Where can I get more information?

A: Visit us at www.BoomChair.com or www.LumiSource.com

Contact information: LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007

NOTE: PLEASE DO NOT USE ON HARDWOOD FLOORS, IT MAY CAUSE SCRATCHING.

TROUBLESHOOTING BOOMCHAIR™