beautypg.com

Cooling check, Final assembly – AquaCraft UL-1 Superior User Manual

Page 5

background image

5

COOLING CHECK

Check the cooling system to make sure water can fl ow
through it. You can do this by running water through the
cooling system to check for leaks. It is not uncommon to get
a small amount of water in your boat during a run.
The
stuffi ng tube typically allows a small amount of water to enter
the boat. If you are fi nding larger amounts of water in the boat
than normal, make sure to re-check the cooling system.

FINAL ASSEMBLY

1. Slide the cover off the bottom of the transmitter.

2. Install the batteries following the diagram in the bottom of
the battery tray.

3. Install the provided hook and loop onto your LiPo batteries.

Tactic TTX-240
1 ON/OFF Push Button Switch
2 Power Light
3 Steering Wheel
4 Antenna
5 Steering Reverse Switch
6 Steering Center Knob
7 Throttle Center Knob
8 Throttle Reverse Switch
9 Steering Travel Adjustment Knob
10 Throttle Trigger