AquaCraft Mini Thunder - Manual (Page 5)

5
1. Slide the battery door off the
bottom of the transmitter.
2. Install 8“AA” batteries into the transmitter in the confi guration molded
into the battery fl oor.
3. Reinstall the battery door onto the
bottom of the transmitter.
4. Turn the transmitter “ON” using the switch on the transmitter’s left
side. The battery level indicator light (LED) should glow red. If the light
is fl ashing, the batteries are low and need to be replaced.
• The antenna tube has the receiver
antenna pre-installed. Slip the
antenna tube into the antenna
mount, being careful not to push
the tube in too far.
INSTALLING THE TRANSMITTER BATTERIES
INSTALLING THE ANTENNA