AquaCraft Atlantic II - Manual (Page 5)

5
Inside the boat you will find two lighting plug-ins coming from
the ON-OFF switch for the lights. You will only be plugging
the cabin into one of the two plugs. Go ahead and plug this in.
knowing you might want to unplug and set the cabin aside to
make it easier to work on for now.
Next install the accessories. You will find them packaged in a
small plastic bag attached to the light mast. Remove the bag
and the accessories inside.
Install the RF antenna on the port side of the light mast. Carefully
slide this in place. If you want, you can place a small dab of
glue (medium CA glue or plastic model cement) to help hold
the part in place. Install the radar antenna the same way but
on the starboard side of the mast.
The center spire slides in from the bottom center of mast. You
can allow this to friction fit or glue as needed.