AltiGen IP 720 - Manual (Page 27)

IP 720 User Manual 19
Network Settings
Registration from the Phone’s Menu
Under normal circumstances, the IP 720 phone registers itself
automatically. However, if registration failed for some reason (for
example, the server was not available), registration can be started again
from the IP 720 phone’s menu:
Emergency
Gateway System >
Emergency GW
Sets the IP phone’s emergency
gateway IP address
Enable SIP
Registration
System >
Enable SIP
Registration
Enables SIP registration to the
emergency gateway
Auto-
discover
System > Auto Discover
Enables automatic discovery of the
server IP address via DHCP option
E911 LID System > E911 LID Sets the phone’s E911 Location ID.
Version
Information
System >
Version Info
[Read only]
Displays the version number of the
IP phone.
Setting Menu Path Description
Enable DHCP
Network >
Enable DHCP
Sets whether Dynamic Host
Configuration Protocol (DHCP) is
being used by the IP phone to retrieve
a new IP address upon boot up.
Local
Address Network >
Local Address
Sets the IP phone’s local address;
shows only if DHCP is disabled.
Network
Mask Network >
Network Mask
Sets the IP phone’s network mask;
shows only if DHCP is disabled.
Gateway
Network >
Gateway
Sets the default Gateway IP address.
Setting Menu Path Description