Agasio A501W - Manual (Page 5)

input. As of Figure 3:
 device name is unique (operation will be denied in case name conflicts) in Device
Management, and once set, it is recommended not to be changed .
 Choose the right product series （ Required ）.
 The fields 'Domain/IP', 'Port', 'Viewing Username', and ‘Viewing Password' are
required. Test the connection from web browser. Since the device is connected
to WAN, IP address can be instead by a domain name.
2） Alarm Setting
Alarm mode can be set by clicking on the Alarm Setting tab, as of Figure 4. Enabling the
alarm, check the 'Enabled alarm' first.
Figure 4: Alarm Setting
Select “All time” or “Schedule armed”，then fill out the Trigger and Action blank.
Note: Before alarm setting, please make sure the ip camera ’s configuration is
correct and it could detect the alarm. (refer to the ip camera user manual)
During the armed period, alarm action like siren, snapshot or video recording will be taken
once the trigger meets.
3） Record Scheduling
Video recording can be scheduled by clicking on the Record Scheduling tab. The device
will perform video recording automatically according to the schedule, as of Figure 5.