Kimber Ultra Carry - Manual (Page 23)

23
1. To release the empty magazine from the frame,
hold hand under magazine and push the magazine
catch which is located on the left side of the
frame behind the trigger. This will cause the
magazine to fall free of the magazine well.
2. To load the magazine, place the round at the
top (open end), push down and back making
sure that the back of the cartridge is facing the
rear of the magazine. Repeat this procedure until
magazine is fully loaded.
3. Place the magazine in the magazine well in the
frame, with the rounds facing forward, and
push up until magazine is fully seated. A click
will be heard when this is done properly as the
magazine catch engages.
4. To chamber a round, hold the pistol in the
shooting hand
without touching the trigger.
Make sure it is pointed in a safe direction.
RETAINING LIP
MAGAZINE
FOLLOWER
FIGURE 3-LOADING MAGAZINE