Bio Bidet Premium i3000 Bidet Seat - Manual (Page 13)

3
Connecting the T-Valve (Cold Water / Hot Water)
1. Flush out remaining water in water tank
2. Removing existing fill valve water supply hose.
3. Install supplied T-valve.
4. Connect “Cold”/ “Hot”water suppy tube.
5. Connect supplied fill valve water supply hose.
(7/8”× 3/8”)
Tip:
Do not over tighten supplied parts when installing.
Use only hand pressure initially,
then tighten it gradually as checking for leakage.
13
INSTALLATION
Packing Rubber
(Black)
BB3000.09 2013.3.26 3:7 PM 페이지13 mac001 JETPDF 2540DPI 175LPI